Every part and tool from the field guide, with a fit check. Tools have exact part numbers; wear parts are matched by VIN or the old part. Check the fit before you buy. Back to the guide
As an Amazon Associate I earn from qualifying purchases. The 'Check price on Amazon' buttons on this page are Amazon affiliate links: if you buy through one, Repair Guider may earn a commission at no extra cost to you. The other store links are plain links and earn us nothing. We pick parts for the repair, not for the commission. Affiliate disclosure
Stores listed for: United States
PARTS + SUPPLIES
Pad and rotor set for your vehicle
Part no.match by year, make, model, VIN
✓ How to check fitBuy by VIN at the counter or on the parts site. Front and rear are different. I compare the new pad shape with the old one before I start.
CRC Brakleen Non-Chlorinated brake parts cleaner (green can)
Part no.CRC 05088, 14 wt oz aerosol
✓ How to check fitNon-chlorinated only: the green can. The red chlorinated can (Brakleen Non-Flammable) stays on the shelf: it is banned for consumer brake cleaning in California and New Jersey, and its fumes are toxic. The green can is extremely flammable: use outdoors, no flame or sparks nearby, and keep it off paint and rubber.
✓ How to check fitFit check: a matched pair of the same model, set to the same height, on hard, level ground (concrete, never asphalt on a hot day, gravel or dirt), under one end of the vehicle only. T43002 = 3 ton per pair, lift range 11-1/4 to 16-3/4 in (Torin manual). For a heavy pickup or large SUV get heavier, taller stands.
TEKTON 1/2 in drive click torque wrench, 25–250 ft-lb
Part no.24340
✓ How to check fitBefore you buy, check that your maker's numbers fall within 25–250 ft-lb. Lug nuts fit this range; caliper bolts and slide pins are often under 25 ft-lb and need a smaller 3/8 in drive torque wrench. Store it at its lowest setting (maker manual). No wrench? Many parts stores lend one against a refundable deposit .
Caliper piston tool (or a C-clamp and the old pad)
Part no.push-back tool or 2/3-pin rewind tool
✓ How to check fitA C-clamp and the old pad pushes back most front pistons. Rear pistons that have notches must be wound in with a rewind tool; parts stores loan both.
Fit notes are guidance, not a guarantee. Confirm with your VIN, the old part or the maker's catalogue before you buy. Prices and stores change. Edition 3.0 · 2026-10-07